Caterham De Dion Axle Hub Shims£3.00 each or £10 per set of four including delivery by 1st class post & VAT
| Camber Shim | Toe Shim | |||||
| Shim | Thickness | Degrees | Shim | Thickness | Toe Change | Degrees |
| C1 | 0.1mm | 0.1 | T1 | 0.12 | 0.5mm | 0.08 |
| C2 | 0.2mm | 0.2 | T2 | 0.25 | 1.0mm | 0.16 |
| C3 | 0.5mm | 0.5 | ||||
| Note the above data assumes use of a 13" rim. | ||||||
These shims are precision laser cut in mild steel and ensure highly accurate set up of the rear hubs on De Dion axle Caterhams. Unlike the use of alloy can material, these shims enable the set-up to be correct first time and will not distort with use. These shims can be ordered stand alone or we can also use these as part of a full flat-floor set-up. Please specify the shims required by the C(amber) or T(oe) reference. Click here to Buy Now through an email order or ask us some questions
Note: Use of these shims is specifically allowed by the Caterham race regulations. However, due to the stresses involved in motor sport, supply of these shims does not imply any warranty by DPR Motorsport as to suitability.